Koppar C17510 Pulver

Översikt

Koppar C17510-pulver är ett kopparbaserat legeringspulver som innehåller nickel, kisel och krom som sina huvudsakliga legeringselement. Den är känd för att ha hög hållfasthet, god korrosionsbeständighet, utmärkt lödbarhet samt hög termisk och elektrisk ledningsförmåga.

Some key properties and characteristics of Copper C17510 powder include:

Sammansättning

• Copper – Balance
• Nickel – 9-11%
• Silicon – 3-4%
• Chromium – 0.3-1.2%

Egenskaper

• Hög hållfasthet och hårdhet
• Utmärkt korrosionsbeständighet
• Great brazeability
• Hög termisk och elektrisk ledningsförmåga
• God slitstyrka

Partikelstorlek

• Typically under 325 mesh (<44 μm)
• Anpassade partikelstorlekar tillgängliga

Produktionsmetoder

• Atomisering av gas
• Atomisering av vatten

Tillämpningar

• Brazing pastes and preforms
• Thermal management interfaces
• Elektriska kontakter och anslutningar
• Slitstarka beläggningar

Sammansättning

The composition of Copper C17510 allows it to have a unique combination of strength, conductivity, and brazeability. Here are more details on the composition:

Copper (Balance)

• Provides excellent thermal and electrical conductivity as the base metal
• Enables good ductility for formability in applications

Nickel (9-11%)

• Increases strength through solid solution strengthening
• Contributes to corrosion resistance
• Helps maintain conductivity

Silicon (3-4%)

• Aids flowability for improved brazeability
• Increases corrosion resistance
• Can enable precipitation strengthening

Chromium (0.3-1.2%)

• Improves high temperature strength
• Enhances corrosion resistance especially in reducing environments

Trace amounts of magnesium, aluminum, zinc, lead, tin, iron, phosphorus, carbon are typically present. Tight controls on composition within specified ranges is necessary to achieve consistent properties.

Egenskaper och kännetecken

Copper C17510 stands out for its well-balanced material properties making suitable for high performance applications:

Mekaniska egenskaper

Fastighet	Värde
Draghållfasthet	550-750 MPa
Utbyteshållfasthet	≥ 380 MPa
Töjning	3-10%
Hårdhet	≥ 150 HB

• High strength from nickel and alloy strengthening
• Good ductility for moderate formability

Fysikaliska egenskaper

Fastighet	Värde
Täthet	8,8 g/cm3
Smältpunkt	1020-1050°C

Termiska egenskaper

Fastighet	Värde
Termisk konduktivitet	50-100 W/m-K
Koefficient för termisk expansion	17 x 10-6 K-1

• Excellent thermal conductivity for heat transfer

Elektriska egenskaper

Fastighet	Värde
Elektrisk resistivitet	≤ 0.05 ohm-cm
Elektrisk konduktivitet	≥ 20 MS/m

• High electrical conductivity from copper

Brazing Properties

Fastighet	Värde
Liquidus Temperature	1020-1040°C
Solidus Temperature	980-1000°C

• Low brazing temperature
• Excellent flowability and gap bridging

Motståndskraft mot korrosion

• Good resistance to atmospheric environments
• Suitable for indoor and mild outdoor exposure
• Chromium improves resistance especially in reducing conditions

Slitstyrka

• Good erosion, abrasion, and fretting resistance
• Can be further enhanced through heat treatment

Tillämpningar

The balanced material properties of copper C17510 powder make it well suited for the following applications:

Lödning

Copper C17510 is used in making brazing pastes and preformed shapes due to its low brazing temperature, excellent flow and gap fill capabilities.

Typical brazes include:

• Copper, brass, bronze
• Steels, stainless steels
• Nickellegeringar
• Tungstenskarbid

It is widely used to join components in:

• Värmeväxlare
• Oil coolers
• Electronic devices
• Skärande verktyg

Benefits for brazing:

• Excellent flowability and wetting
• Good gap bridging ability
• Uniform joint interfaces
• High joint strength
• Does not require flux with proper joint preparation

Termisk hantering

C17510 finds use in thermal management applications thanks to its high thermal conductivity coupled with good strength:

• Kylflänsar
• Heat spreaders
• Thermal interface materials (TIMs)

It enables excellent heat dissipation in electronics cooling and thermal transfer processes. Can be integrated as Cu-C17510 coatings, structures or composites on device surfaces or heat sinks.

Benefits for thermal management:

• Greater ability to transfer heat than aluminum or copper alone
• Well-bonded metallurgical coatings for improved efficiency
• Withstands thermal cycling without degradation
• Ease of forming complex shapes

Elektriska kontakter

The alloy is applied in electrical components like:

• Connectors
• Relays
• Switches

It provides high electrical conductivity to allow signals and currents to pass through while having good strength, hardness and wear resistance to withstand repetitive contact forces over time.

Benefits for electrical contacts:

• Excellent electrical conductivity minimizes power losses
• Resists welding, arcing, and sticking of contacts
• Maintains surface smoothness and low contact resistance after prolonged use
• Tolerates occasional arcs without significant erosion

Skyddande ytbeläggningar

Copper C17510 coatings provide good wear protection in:

• Lager
• Bushings
• High pressure valves
• Landing gear components

The coatings act sacrificially under impact, abrasion, or chemical attack preventing wear on critical substrate surfaces.

Benefits as protective coatings

• Harder than regular copper providing wear resistance
• Withstands repetitive contact and impact
• Chemically compatible with ferrous alloys
• Retards galling and adhesive wear failure modes
• Restores dimensions of worn components

Copper C17510 Powder Specifications

Copper C17510 powder products are available in different size ranges, morphologies, and types to suit various application needs:

Fördelning av partikelstorlek

Mesh Range	Partikelstorlek
-100	< 149 μm
-140	<105 μm
-200	<74 μm
-325	<44 μm
-400	<38 μm

• Tighter size distributions for precise dispensing
• Chemically inert gas atomized spherical types preferred for brazing
• Fine irregular powder for thermal spray coatings

Morfologi

• Spherical – Gas atomized
• Irregular flakes – Water atomized
• Mixed shapes – Crushed powders

Common Types

Typ	Syrehalt	Produktionsmetod	Form
CuCr10Ni10	<100 ppm	Atomiserad gas	Sfärisk
CuCr10Ni10	<300 ppm	Vatten som finfördelas	Irregular flakes
CuCr10Ni10	>1000 ppm	Crushed	Mixed morphology

Product Standards

• ASTM B751
• Other national and international standards
• Manufacturer specifications

Quality Checks

• Composition verification via spectrometry
• Particle size analysis using laser diffraction
• Morphology checks under SEM
• Powder flow rate measurement
• Apparent and tap density values
• Checks for satellite particles

Förpackning

• 1 to 25 kg plastic bottles in boxes
• Double sealed metal drums up to 500 kg
• Vacuum sealed foil bags

Förvaring

• Store in cool, dry environments
• Sealed containers to prevent contamination
• Avoid direct sunlight, excessive moisture, oxygen

Copper C17510 Powder Suppliers

Some leading global suppliers of copper C17510 alloy powder include:

Företag	Produktionsmetoder	Morfologi	Partikelstorlekar	Varumärken
SCM Metallprodukter	Atomiserad gas	Sfärisk	-100 to -325 mesh	Xuperloy
Atlantic Equipment Engineers	Gas och vatten finfördelas	Spherical and irregular	-100 to -325 mesh	Aeeloy
Kymera International	Atomiserad gas	Sfärisk	-100 to -325 mesh	Kinectiq
Sandvik Osprey	Atomiserad gas	Sfärisk	-100 to -400 mesh	Osprey
Hoganas	Atomiserad gas	Sfärisk	-100 to -325 mesh	Hoganas