Aluminium AlMgSi Pulver

Översikt

Aluminium AlMgSi pulver är ett aluminiumlegeringspulver som innehåller magnesium och kisel som sina viktigaste legeringselement. Den är känd för sin goda hållfasthet, korrosionsbeständighet och bearbetbarhet.

Some key properties and characteristics of Aluminium AlMgSi powder include:

Aluminium AlMgSi Powder Properties

AlMgSi aluminium powders find a wide range of applications owing to their well-balanced set of properties. They offer higher strength than pure aluminium while retaining the metal’s low density, excellent corrosion resistance, conductivity, and workability.

The magnesium and silicon present as alloying elements in AlMgSi powder impart strength through precipitation hardening and solid solution strengthening mechanisms. The composition is tailored to provide optimized properties required for specific applications across industries.

Aluminium AlMgSi Powder Composition

AlMgSi aluminium alloy powders have a typical composition of 0.5-1.5% Magnesium and 0.5-1.3% Silicon, with aluminium constituting the balance.

Other alloying elements may be present in small amounts or intentionally added to tweak certain properties. These could include elements like iron, manganese, chromium etc.

The table below shows the broad composition range:

Typical Composition of Aluminium AlMgSi Powder

The ratio of magnesium and silicon is balanced to maximize strength through precipitation hardening while avoiding any detrimental reductions in ductility, fracture toughness or corrosion resistance.

Varying the individual and relative percentages of the alloying elements creates sub-variations of the AlMgSi grade optimized for more specific applications. For example, an AlMg1SiCu powder tailored more for welding or an AlMg0.8Si for high pressure die casting.

Controlling impurities like iron at low levels is also critical to achieve the desired powder characteristics. Special production techniques and stringent raw material selection is involved to keep impurities in check.

Production Method for AlMgSi Aluminium Powder

AlMgSi aluminium alloy powder can be manufactured using different techniques:

• Atomisering: Molten AlMgSi alloy is disintegrated into fine droplets using gas or water which rapidly solidify into powder. This yields high purity powder suited for additive manufacturing or MIM.
• Mekanisk fräsning: Ball milling of AlMgSi ingots or chips/turnings to produce powder through cold welding and fracturing. Lower cost but powder particles have some contamination.
• Electrolytic Process: Anodic dissolution of AlMgSi alloy to produce powder through electrolysis. Powders are angular, suited for thermal spraying.

Each process results in powders of different particle shape, size distribution, oxygen/nitrogen pick-up, and production economics. The table below summarizes the comparison:

Comparison of AlMgSi Powder Production Methods

Atomized AlMgSi powders offer superior properties but are more expensive. The suitable production method is selected based on the application requirements and economics.

Properties of AlMgSi Aluminium Alloy Powder

Some of the key properties of Aluminium AlMgSi powder are:

Properties of AlMgSi Aluminium Powder

The density, thermal conductivity, and electrical conductivity values are very close to pure aluminium powder. However, the strength properties are significantly higher owing to magnesium and silicon’s alloying effect.

The alloy powder also retains excellent corrosion resistance in various environments and good workability for further processing through extrusion, forging, rolling etc.

Overall, AlMgSi powder delivers an optimized combination of medium strength, light weight, formability, thermal conductivity and corrosion resistance required in its intended applications.

Applications of Aluminium AlMgSi Powder

The applications of AlMgSi alloy powder span across automotive components, general engineering, consumer appliances, heat sinks electronics, and rapid manufacturing sectors.

Some major application areas are:

Applications of AlMgSi Aluminium Powder

The lightweight, strong, conductive, and corrosion resistant powder is valued across high-performance and demanding applications.

Key drivers for use are:

• Replacing heavier metals like steel and cast iron
• Improved fuel efficiency in transport
• High thermal conductivity for heat removal
• Dimensional stability across operating temperatures
• Resistance to weathering, fuels, oils and weak acids

AlMgSi powders match these requirements while affording excellent fabrication, joining, and machining behavior.

Aluminium AlMgSi Powder Specifications

Aluminium AlMgSi powders are available under various standard classifications or custom specifications tailored to user requirements.

Some common standards for composition, testing methods, and conformance criteria include:

Standard Specifications for AlMgSi Alloy Powder

Specifications would list out the permissible content ranges for alloying and impurity elements, powder particle size distribution, aspects like spherical morphology and minimal satellite content for atomized powder, loose bulk density range, flow rates etc.

Acceptance testing procedures and certificate of conformance are also detailed to ensure powder quality as per applicable codes. Customers may have their own internal standards too aligned with the end application.

Aluminium AlMgSi Powder Manufacturers

Some of leading global producers of AlMgSi aluminium alloy powders are:

Key Manufacturers of AlMgSi Alloy Powder

These companies offer AlMgSi powders under various brand names and customized specifications. Manufacturers also undertake additional value additions like sieve classification, blending, thermal treatments etc. according to the application demands.