Plynem atomizovaný titanový prášek
Obsah
Gas atomized titanium powder is a high purity titanium powder produced through gas atomization, a process where molten titanium is hit with high pressure gas streams to produce fine titanium particles. This powder has unique properties that make it suitable for various applications across industries.
Overview of Gas Atomized Titanium Powder
Gas atomized titanium powder has the following key characteristics:
Složení
Main component | titan (Ti) |
Common alloys | Ti-6Al-4V, Ti-6Al-4V ELI |
Stopové prvky | Oxygen, nitrogen, hydrogen, iron |
Vlastnosti
Tvar částic | Sférické |
Velikost částic | 15 - 150 mikronů |
Tekutost | Vynikající díky kulovitému tvaru |
Zdánlivá hustota | 2.7 – 3.5 g/cc |
Hustota poklepání | 3.5 – 4.5 g/cc |
Výrobní proces
- Raw titanium ingots are melted using plasma arc melting
- High pressure inert gas (usually argon or nitrogen) is used to atomize the molten titanium
- Fine spherical powder particles solidify rapidly in the atomization tower
- Powder is collected and sieved into appropriate particle size ranges
Standardy kvality
- ASTM B849
- AMS 4992
- ISO 22068
Běžné obchodní názvy
- Ti64 ELI Grade 23
- Plasma Atomized Ti-6Al-4V Grade 5
Náklady
Velikost částic | Cena za kg |
---|---|
15-45 mikronů | $50-$100 |
45-105 mikronů | $30-$60 |
105-150 microns | $20-$40 |
![Gas Atomized Titanium Powder 1 gas atomized titanium powder](https://met3dp.com/wp-content/uploads/2023/10/GH3230-Powder.jpg)
Aplikace z Plynem atomizovaný titanový prášek
Gas atomized titanium sees use across industries owing to its unique properties. Some major applications include:
Aditivní výroba
- Selektivní laserové tavení (SLM)
- Tavení elektronovým paprskem (EBM)
- Tryskání pojiva
Used to produce complex titanium components for aerospace, medical, and automotive parts.
Vstřikování kovů
- Small complex parts like fasteners, gears
- Vysoká mechanická pevnost
- Net-shape or near-net shape parts
Tepelné nástřiky
- Corrosion and wear-resistant coatings
- Hardface coatings up to 550 HV
Prášková metalurgie
- Sintered parts like golf club heads, bicycle parts
- Porous structures for filters, implants
Pyrotechnika
- Bright burning titanium sparks
- Military, entertainment, other applications
Suppliers of Gas Atomized Titanium Powder
Most major titanium producers and metal powder manufacturers supply gas atomized titanium powder. Some leading global suppliers include:
Dodavatel | Umístění |
---|---|
AP&C | Kanada |
Práškové kovy ATI | USA |
Tesařská technologie | USA |
Hoganas | Švédsko |
GfE Metalle und Materialien | Německo |
Technika TLS | Německo |
Stanovení cen
Gas atomized titanium powder is more expensive than other forms of titanium powder owing to the complex manufacturing process. Prices range from $20 per kg for larger size fractions to $100 per kg for the finest medical grade powders. Minimum order quantities are usually around 25-100 kg.
Výhody a nevýhody Plynem atomizovaný titanový prášek
Výhody
- Spherical morphology gives excellent flowability
- High purity, alloyed grades available
- Řízená distribuce velikosti částic
- Used in advanced applications like additive manufacturing
Nevýhody
- More expensive than other titanium powder types
- Limited suppliers and production capacity globally
- Requires specialized storage and handling
Comparison to Other Titanium Powder Types
Versus Sponge Fine Titanium
- 10X higher cost
- Far superior powder properties and consistency
Versus Hydride-Dehydride Titanium
- 2X higher cost on average
- Better sphericity and flowability
- Used in more advanced applications
Versus Plasma Rotating Electrode Process Powder
- Cost is comparable
- Gas atomized has slightly better sphericity
- PREP allows larger particle sizes
Distribuce velikosti částic
Controlling particle size distribution is critical for gas atomized titanium powder. Some common size cuts include:
Velikost částic | Typické aplikace |
---|---|
15-45 mikronů | Aditivní výroba |
45-105 mikronů | Vstřikování kovů |
105-150 microns | Tepelně stříkané povlaky |
Difrakce laseru nebo sieving technique is used to characterize the particle size distribution. Common statistical parameters used are:
- D10, D50, D90 (Size below which 10%, 50%, 90% particles fall)
- Span (Measure of distribution width)
ISO 13320 standard specifies procedure for analyzing size distribution using laser diffraction.
Vliv nečistot
Impurities negatively impact powder properties and must be controlled through melting and atomization process.
- Oxygen – Increases hardness and brittleness if >0.4%
- Nitrogen – Causes porosity issues > 0.05%
- Hydrogen – Causes porosity and cracking issues
- Iron – Reduces ductility and fracture resistance
Vacuum induction melting and spray forming helps achieve low oxygen and iron levels.
Skladování a manipulace
Special precautions needed while storing and handling titanium powder:
- Moisturesensitive – store in sealed containers with desiccant bags
- Explosion risk – inert gas blanketing required
- Pyrophoric – burns at fine particle sizes
- Requires electrically conductive containers like stainless steel
Dedicated powder storage rooms, glove boxes, and fume hoods used for handling reactive titanium powder.
Normy a specifikace
Standard | Organizace | Popis |
---|---|---|
ASTM B849 | ASTM | Specification for pre-alloyed titanium powder |
AMS 4992 | SAE | Specification for gas atomized titanium alloy powder |
ISO 22068 | ISO | Specification for gas atomized titanium and titanium alloy powder |
Specifications list acceptable limits of impurity levels, particle size distribution, apparent density and other parameters. Customized customer specifications also common.
Nejčastější dotazy
What is gas atomization process?
Gas atomization uses high pressure inert gas jets to break up a stream of molten metal into fine droplets. These droplets rapidly solidify into spherical powder particles.
What is the benefit of spherical powder morphology?
Spherical particles have excellent flowability. This allows uniform packing and spreading needed for additive manufacturing and metal injection molding.
What are common alloys of gas atomized titanium powder?
Ti-6Al-4V, Ti-6Al-4V ELI and Ti-6Al-7Nb alloys are popular for additive manufacturing applications in aerospace and medical sectors.
What affects the cost of gas atomized titanium powder?
Purity, particle size range, shape, and sphericity determines cost. Finer medical grade powders are far more expensive than coarse industrial grade powders.
What determines suitability for specific application?
Factors like particle size range, morphology, apparent density, tap density, flow rate, impurity levels decide if the powder matches the requirements of AM, thermal spray or MIM process.
Sdílet na
Facebook
Cvrlikání
LinkedIn
WhatsApp
E-mailem
MET3DP Technology Co., LTD je předním poskytovatelem řešení aditivní výroby se sídlem v Qingdao v Číně. Naše společnost se specializuje na zařízení pro 3D tisk a vysoce výkonné kovové prášky pro průmyslové aplikace.
Dotaz k získání nejlepší ceny a přizpůsobeného řešení pro vaše podnikání!
Související články
O Met3DP
Přehrát video
Nedávná aktualizace
Náš produkt
KONTAKTUJTE NÁS
Nějaké otázky? Pošlete nám zprávu hned teď! Po obdržení vaší zprávy obsloužíme vaši žádost s celým týmem.
![malé kovové 3dp logo](https://met3dp.com/wp-content/uploads/2023/09/metal-3dp-logo-small.png)
Kovové prášky pro 3D tisk a aditivní výrobu
SPOLEČNOST
PRODUKT
kontaktní informace
- Město Qingdao, Shandong, Čína
- [email protected]
- [email protected]
- +86 19116340731