AlSiCu prášek (AlSi10)

AlSi10 je prášek z hliníkové slitiny obsahující křemík 10% a zbytek hliník. Nabízí vynikající kombinaci pevnosti, nízké hustoty, tepelných vlastností, odolnosti proti korozi a svařitelnosti.

AlSi10 Powder Composition

The typical composition of AlSi10 alloy powder is:

• Aluminum forms the matrix providing low density, ductility and corrosion resistance.
• Silicon provides solid solution strengthening and improves castability.

Strict control of the aluminum to silicon ratio is critical to achieve optimal strength and physical properties. Other minor alloying elements like magnesium, iron, copper or zinc may also be present in certain grades.

Properties of AlSi10 Powder

AlSi10 powder possesses an excellent combination of properties making it suitable for various demanding applications:

• Nízká hustota – Up to 65% lighter than copper alloys and steels.
• Vysoká tepelná vodivost – Enables rapid dissipation of heat in electronics.
• Vysoký poměr pevnosti a hmotnosti – Strength comparable to titanium alloys with lower density.
• Excellent weldability and castability – High fluidity when molten allowing easy casting and welding.
• Resistant to corrosion and oxidation – Protective oxide layer prevents corrosion in many environments.

This exceptional property profile makes AlSi10 suitable for lightweight structural applications across aviation, space, automotive and other sectors.

Applications of AlSi10 Powder

Owing to its lightweight, strength and thermal properties, AlSi10 powder is ideal for:

• Used extensively in aircraft and rocket components like engine mounts to reduce weight.
• Automotive industry uses AlSi10 for pistons, transmission casings, suspension parts to improve fuel efficiency through lightweighting.
• Electronic enclosures and heat sinks leverage high thermal conductivity for efficient cooling.
• Rewards excellent strength-to-weight ratio with lower density compared to titanium alloys.
• Provides excellent biocompatibility, corrosion resistance for medical implants like orthopedic devices.

AlSi10 delivers maximum performance in demanding applications where low mass and high strength are critical.

AlSi10 Powder Specifications

AlSi10 powder is available in various size fractions, shapes and purity levels:

• Smaller particles promote better sintering while larger sizes provide higher flowability.
• Spherical morphology improves flow and packaging density. Irregular particles offer cost benefits.
• Higher apparent density increases effective loading in composites manufacturing.
• Higher flow rates enhance ease of powder handling and processing.
• High purity reduces contamination issues during processing and improves final properties.
• Range of silicon levels between 5-12% available to balance fluidity and strength.

Powder attributes are customized based on specific application requirements and processing methods.

Consolidation Methods for AlSi10 Powder

AlSi10 powder can be transformed into full density components using techniques like:

• Powder bed fusion additive manufacturing methods like selective laser melting are popular for prototypes or low volume production.
• Metal injection molding offers closest tolerances and excellent surface finish.
• Pressing followed by liquid phase sintering is commonly used but secondary processing like extrusion is needed.
• Extrusion leverages excellent castability to produce rods, tubes and profiles.
• Cold and hot isostatic pressing reduce porosity and increase density.

The consolidation technique influences the microstructure, final properties, geometrical capabilities and productivity.

Heat Treatment of AlSi10 Parts

Solution heat treatment and artificial aging are used to tailor the strength of AlSi10 components:

• Solution heat treatment dissolves alloying elements like silicon in the aluminum matrix followed by rapid cooling or quenching.
• Subsequent aging treatment causes fine precipitation resulting in considerable hardening.
• Annealing helps recover ductility after extensive prior cold working.

Careful control of time and temperature of solutionizing and aging allows customizing mechanical properties as per specific requirements.

Comparison of AlSi10 Powder with Alternatives

Here is how AlSi10 compares to other aluminum alloy powders:

• AlSi12 has the highest strength but poorer weldability and thermal conductivity.
• 6061 is a popular general purpose alloy with medium strength and good corrosion resistance.
• 7075 excels in very high strength but has poor weldability and only moderate corrosion resistance.
• AlSi10 provides the best all-round properties with added cost benefits.

For most applications, AlSi10 offers the optimum balance of performance, weldability and cost.

AlSi10 Powder Manufacturers

As a widely used alloy, AlSi10 powder is produced by major global suppliers:

Reputable manufacturers have stringent quality control and conform to specifications of international standards organizations. They also customize powder characteristics based on application requirements.

AlSi10 Powder Pricing

As a high performance alloy powder, AlSi10 commands a premium over plain aluminum powders. Indicative pricing is:

• Finer fractions for AM and sintering cost more than coarser pressing grades.
• Smaller order quantities under 100 kg attract higher prices.
• High purity grades with lower oxygen, nitrogen are over 50% more expensive.
• Reducing silicon content to AlSi5 lowers cost by around 15%.

Volume discounts, longer term contracts and simpler particle specifications can help lower cost.

Health and Safety Considerations for AlSi10 Powder

Like any metal powder, AlSi10 powder requires safe handling:

• Wear gloves, goggles, mask when handling powder.
• Avoid skin contact. Wash after exposure.
• Store in cool, dry place away from sparks, flames.
• Ensure proper ventilation and dust collection.
• Refer SDS and local regulations for complete guidelines.

With proper precautions and PPE, AlSi10 powder can be safely handled during storage, processing and operation.

Inspection and Testing of AlSi10 Powder

To ensure quality requirements are met, AlSi10 powder should be tested for:

Routine testing as per ASTM standards ensures consistency and high quality powder suitable for critical applications.

Nejčastější dotazy

Q. What is AlSi10 alloy used for?

A. AlSi10 is widely used in aerospace, automotive, and electronics applications where low weight and high strength are critical such as engine mounts, pistons, housings, heat sinks.

Q. Does AlSi10 require heat treatment?

A. Yes, solution heat treatment followed by aging can significantly enhance the tensile strength by precipitating alloying elements like silicon.

Q. What methods can consolidate AlSi10 powder?

A. AlSi10 powder can be consolidated to full density using additive manufacturing, metal injection molding, extrusion, and powder compact forging.

Q. Is AlSi10 weldable?

A. Yes, AlSi10 has excellent weldability owing to the silicon alloying addition which improves fluidity in the molten state. This allows easy fusion welding.

Q. Is AlSi10 powder safe to handle?

A. Like any fine metal powder, standard safety precautions should be taken during storage, handling and processing of AlSi10 powder to minimize health and safety risks.