Metal Alloy Powders

Metal alloy powders enable manufacturing of high performance parts using powder metallurgy pressing and sintering or additive manufacturing methods across transportation, industrial, medical and energy industries. This guide covers various alloy options, powder production processes, key specifications, use cases, quality considerations and sourcing advisory.

Types of metal alloy powders

Common categories:

Match alloy material properties to critical part performance requirements like heat tolerance, hardness, fatigue life etc driving powder grade selection.

Metal Powder Production Methods

Key commercial scale manufacturing processes:

• Gas Atomization – High pressure inert gas breaks up molten metal stream into fine droplets. Achieves spherical powders with good flow and packing properties. Different nozzles generate desired size ranges.
• Plasma Atomization – High energy plasma arc melts feedstock. Powerful induction coils generate droplets that solidify into spherical powders with tight particle distributions.
• Rotating Electrode – Centrifugal forces acting on spinning molten alloy subjected to inert gas jets causes disintegration into fine droplets resulting in spherical powders.
• Electrolysis – Metal ions from solution plate out on cathodes as fine powder particles. Used for reactive materials like aluminum, magnesium, titanium.

Controlling process parameters like temperature, atmosphere and cooling rates result in quality powder feedstock for part fabrication using additive manufacturing or powder metallurgy compaction.

Typical Specifications

Review statistical batch data from manufacturer against these metrics specific to your target grade confirming quality and consistency relative to standards.

Applications

Metal alloy powder applications span:

Aerospace – Engine components like blades, nozzles; airframe fittings, landing gear parts; on-board systems

Industrial – Natural gas/petroleum pumps, valves, drill bits; tooling inserts; nuclear reactors; heat exchangers

Automotive – Engine components, turbocharger rotors, gears; chassis, drivetrain parts

Medical – Implants for knees, hips, dental; surgical tools; imaging instruments

Consumer – High end watches, sports equipment like bicycles, golf clubs etc requiring strength, aesthetics

Energy – Solar cell contacts, electrodes; generators; battery components; wind turbines

Taking advantage oftailorable materials properties with design freedom and precision.

Industrial Standards

Key specifications applicable to metal alloy powders:

Review statistically validated certifications showing conformance to grade composition limits and production quality consistency relative to applicable standards.

Common Metal Powder Grades

Match target grade to applicable alloy specifications that align with finished part functionality needs across strength, conductivity, corrosion resistance parameters.

Quality Considerations

Consistent quality across these metrics is directly correlated with consistent final part performance meeting specifications.

Sourcing Considerations

Try powder samples first before large purchases to qualify printing or compression responses relative to application needs.

FAQs

Q: What is the difference between pre-alloyed and blended elemental powders?

A: Pre-alloyed powders have uniform composition throughout each spherical particle. Blended elemental mixes may have slight composition differences between particles that can create inhomogeneities in final parts.

Q: Should metal powders be stored under special conditions?

A: Store sealed with dessicant away from moisture and oxygen which causes deterioration. Limit temperature variation to 10-30°C. Discard if severe discoloration, caking or significant loss of flow. Shelf life is typically over a year if properly stored.

Q: What are common metal powder blend mixes?

A: Cobalt-chrome, stainless steel-17-4PH, and nickel alloy-stainless steel powder blends offer ways to tailor final part material properties like strength, wear resistance or corrosion resistance at lower costs than high purity grades.

Q: What precautions are needed when handling metal powders?

A: Use appropriate PPE and avoid skin contact or inhalation during powder handling. Passivated powders pose fewer health hazards compared to atomized powders which can be more reactive. Review SDS sheets on flammability, reactivity and exposure protocols.

know more 3D printing processes